back to the products page
Aixia Pro Series foam cutters options
Computerized TurnPro Turntable
Available as an option for the Standard, Pro and Industrial Series machines, the
fully computerized TurnPro Turntable
will open a world of dimensional abilities. The TurnPro Turntable is an
automated, computer driven process which requires no user intervention once started. The TurnPro
allows the user to create designs from as simple as a 180° turn to as complex as a
different profile every 0.225°.
By the basis of its design the TurnPro does not create “true” 3D objects.
Instead it cuts a series of flat XY vertical cuts with a specified turn of the turntable
between each successive cut.
See FLASH sample on this page
For example to create a symmetrical object such as a soda bottle, the designer will
design a silhouette view of a bottle. This profile is then loaded into the
AFC software
and the designer specifies how many times this design will be repeated around the circle.
If the designer chose to have 40 facets on the bottle, this will create 40 small flat
faces on the surface or a flat every 9°. The Aixia will cut the first silhouette and the
wire will pause at the end position, the turntable turns 9° and the silhouette is cut
downwards as the wire returns to the starting point. Once the wire reaches the starting
point it will again pause while the turntable turns 9° and the silhouette is cut again.
This process is repeated until the complete soda bottle is cut.
One very productive application of the TurnPro is the production of caps and bases for
columns. If this design is repeated 4 times (once every 90°) you will create a unique
design with very little manual labor required.
In a similar yet slightly different procedure the TurnPro is also capable of cutting
non-symmetrical objects such as a banana, perfume bottle, cellular phone
(see drawing on the right), etc. Similar to cutting a
symmetrical object, the Aixia cuts a silhouette design and pauses while the turntable
turns. However on the return cut, the AFC software reads ahead and has loaded the second
profile shape (which may be different from the first) and cuts the second profile while
returning to the start point. Again the wire pauses once it reaches the start point, the
turntable turns and the AFC software has read the third profile and starts to cut this
on the upward cut. This process is repeated until all the profiles are cut.
The TurnPro is a very powerful option that will undoubtedly set the precedent for others
to follow.
Specifications on the Aixia TurnPro turntable
option
Follow the links to see the optional TurnPro turntable at
work
Cutting a banana on the
Aixia 64T Hot wire foam cutter from EPS foam.
Cutting a bottle from EPS foam on the
Aixia T64 hot wire foam cutter
Download brochure in PDF format Aixia
TurnPro
|
